ETA PC20 to 105 biomass boiler, pellet fuel


 

Small boiler,

Outstanding performance

The ETA PelletsCompact needs little space and is the ideal pellet boiler for renovations or new builds of larger residential buildings and office spaces. 

It is only about 130 cm high, about one metre long and not even 95 cm deep  – but it heats large residential buildings or small company buildings. 

Can be set-up anywhere

The ETA PelletsCompact (only for 20- 32 kW) can be operated with external air , i.e. the combustion air can be piped directly to the boiler from outside. This means that the boiler can also be situated in heated buildings without creating unwanted draughts, or in rooms with extract ventilation.

In common with its smaller relation, the ETA PU, the boiler comes equipped with a built-in control system capable of controlling a domestic hot water cylinder, a buffer vessel and two heating circuits as standard. With an internet connection it can also be configured to send you emails when it is running low on fuel, or if the ash can needs emptying.

Its built-in vacuum system is capable of pulling fuel pellets from a bulk store up to 20 metres away to fill its day hopper, which gives you extra flexibility when siting the boiler.

 

Technical Specifications 20 to 50kW

PelletsCompactUnit20 kW25 kW32 kW40 kW45 kW50 kW
Rated capacitykW6.0 – 20.07.3 – 25.07.3 – 32.012.0 – 40.012.0 – 45.014.6 – 49.9
Energy efficiency class**       
Efficiency at partial / full load*%93.9 / 94.492.2 / 95.292.2 / 94.592.3 / 93.392.4 / 92.592.5 / 91.8
Combustion efficiency(installation within living area) partial / full load%97.0 / 95.896.7 / 96.196.7 / 95.5Operation with external air supply 
NOT possible!
Boiler dimensions, W x D x Hmm1,110 x 644 x 1,3751,175 x 805 x 1,390
Weightkg380462
Water contentLitres5276
Available residual pump head at ?T = 20 °C for buffer operationmWS / m³/h5.9 / 0.855.6 / 1.064.3 / 1.364.2 / 1.703.5 / 1.923.3 / 2.13
Maximum distance to pellet storem20
Ash box volumeLitres44
Flue draught required at partial / full loadPa> 1 / > 3
above 15 Pa a draught limiter is required
Electrical power consumption at partial / full load*W56 / 9060 / 10160 / 14270 / 15070 / 15575 / 160
Maximum permissible operating pressurebar3
Temperature adjustment range°C70 – 85
Maximum permissible operating temperature°C95
Boiler class 5 acc. to EN303-5:2012
Suitable fuels Pellets, ENplus A1, ISO 17225-2-A1
Electrical connection 1x 230 V / 50 Hz / 13 A

*Data from test reports by BLT Wieselburg

**Energy labelling for packages (solid fuel boiler + temperature control)

Technical changes and mistakes reserved!

     
entsprichtEU-NormenBLT WieselburgÖsterreichTÜV
Süddeutschland
Qualitätssiegel
Holzenergie
Schweiz
Österreichisches
Umweltzeichen

Technical Data 60 to 105 kW

PelletsCompact 607080100105
Rated capacitykW17,9 – 59,920,9 – 69,923,9 – 79,929,9 – 99,829,9 – 103
Energy efficiency class**   
Efficiency at partial/full load* %92 / 9392 / 9392 / 9392 / 9392 / 93
Transport dimensions W x D x Hmm1.528 x 806 x 1.593
Weightkg770
Water contentLiter147
Available residual pump head (at ?T = 20 K)mWS / m³/h4,5 / 2,63,4 / 3,42,4 / 3,43,8 / 4,33,5 / 4,5
Maximum distance to pellet storem20
Ash box volumeLiter100
Required flue draughtPa> 3above 15 Pa a draught limiter is required
Electrical power consumption at partial / full load*W68 / 160
Maximum permissible operating pressurebar3
Temperature adjustment range°C70 – 85
Maximum permissible operating temperature°C95
Boiler class 5 acc. to EN303-5:2012
Suitable fuels Pellets, EN plus-A1, ISO 17225-2-A1
Electrical connection 1 x 230V / 50Hz / 13A

*Data from test reports by TÜV Austria

**Energy labelling for packages (solid fuel boiler + temperature control)

Technical changes and mistakes reserved!

     
entsprichtEU-NormenTÜVÖsterreichTÜV
Süddeutschland
Qualitätssiegel
Holzenergie
Schweiz
Österreichisches
Umweltzeichen